How To Fix A Mechanical Pencil? Know Everything Step By Step

Mechanical pencil is a necessary and reliable tool for students, artists, architects, and engineers. But with a little care and maintenance, the pencil gets jammed. Lead jam appears in very well-used pencils.

The lead jam occurs when a piece of broken lead gets stuck in a pencil tip. It then clogs and prevents the lead from advancing.

Therefore, how to fix a mechanical pencil. Here is a step-by-step guide on how to fix your mechanical pencil.

Therefore, let’s check it out!

How To Fix A Mechanical Pencil

How To Fix A Mechanical PencilĀ  Necessary equipment

You will need some tools to fix the mechanical pencil. For that, you first need to lengthen and do what you can to stick to the tip of the pencil.

Some pencils come with this type of specialized wire known as a “clean-out rod.” The “clean-out-rod” is mounted on the inner side of the eraser. So if you notice that most mechanical pencils offer “clean-out-rod.”

The advantage of a “clean-out rod” is that it is interchangeable. So if you have a “clean-out rod” for a mechanical pencil, you can use it for all pencils. Many eraser refills are included in the “clean-out rod.”

And if the eraser doesn’t fit with your mechanical pencil, don’t throw it away because the eraser is very effective in fixing lead jams.

What to do if you don’t have any “clean-out rod.” Then you can use an extra twist-tie. Usually, these are used for garbage bags or other bag restraints.

If you get a twist-tie, remove the plastic or paper on top. With the help of the inner wire, you can clear the lead jam of a pencil of 0.5 mm or larger size.

If you fail at everything, you can take the help of a small amount of lead. But always keep in mind that we recommend it as an alternative if you fail.

Although the lead is brittle, and with a slight blow, it can break and get stuck on the tip of the pencil. Which can make your pencil lead jam more complicated. Still, it’s an option, so you can use it as a last resort.

Techniques to fix the mechanical pencil – Step by step

How To Fix A Mechanical Pencil

If you get the tools, you need a clean-out rod, use it to remove the lead in the pencil. However, make sure that the lid of the pencil does not fall off or bend while cleaning.

We have presented two techniques for you to remove the lead of a mechanical pencil. If the first technique does not work, try to use the other ones.

Technique 1

Step-1

  • First, unscrew the pencil nose cone.
  • Fix the lead sleeve at the nose cone.
  • If possible, insert the clean-out-rod into the tip of the lead sleeve and also nose cone. Try to clean the broken lids.

Step-2

  • After removing the nose cone, open the pencil’s clutch mechanism.
  • The mechanism is held together by metal or plastic.
  • If your mechanical pencil has a clutch mechanism, hold the push button of the pencil. Slide the ring from the tips of the jaw with your fingernails.

Step-3

  • Then open the lead storage of the pencil and remove the pieces of lead stuck there.
  • Because these will stick to the tip of the pencil later and lead jam again when you go to use the pencil.

Step-4

  • Your pencil is lead-free. Re-screw the nose cone in its place.
  • Then insert a lead to the mechanical pencil.
  • Use the push button of the pencil to extend the lead.
  • You have been able to clean the lead jam very easily and successfully.

Technique 2

This method can help you if you can’t fix the pencil using the first method. The first technique will not work if your mechanical pencil does not have the right type of nose cone or clutch mechanism.

  • First, tip-up the pencil and hold down the push button.
  • Now you have to insert the clean-out-rod at the tip of the pencil.
  • Move as much as possible by inserting it inside the top. Repeat this until all the lead inside is removed.
  • While holding the pencil tip, open the pencil lead storage and remove the pieces of lead that you have used before.
  • Because these will stick to the tip of the pencil later and lead jam again when you go to use the pencil.
  • Once the lead is cleared, add a new lead to the pencil press.
  • Use the push button of the pencil to extend the lead.
  • If your mechanical pencil works, congratulations to you. Because the lead jam of the pencil has been cleared.

Why do mechanical pencils stop working?

It will lead to jam when you use a mechanical pencil regularly. And there is no tension because it is all in the case of mechanical pencils.

When a piece of lead gets stuck in the pencil mechanism, it stops working. As a result, the lead cannot be clicked forward, and when you use it, the leads slide backwards.

How long does a mechanical pencil last?

A mechanical pencil lasts for many years. Because the pencil has a lead inside which is not worn out. Once the pencil lead is finished, you can re-insert the new lead.

How do you take apart a mechanical pencil?

First, open the white cap of the pencil by pulling. Then unscrew the pencil nose cone. After removing the nose cone, open the pencil’s clutch mechanism.

The mechanism is held together by metal or plastic. If your mechanical pencil has a clutch mechanism, hold the push button of the pencil. The shaft will come out of the pencil.

How do you put a mechanical pencil back together?

Re-screw the nose cone in its place. Then add the lead to the pencil. Use the push button of the pencil to extend the lead.

Wrapping up

We hope your mechanical pencil works just as before. Many have used these two techniques to make their pencils lead-free.

We hope to help you with the right information. If you think, our information has been useful to you, you must share our guide with your family and friends!

Leave a Comment